• China
  • Vietnam
  • Thailand
  • Malaysia
  • Kazakhstan
  • Myanmar
  • India
  • Indonesia
  • Singapore
Services Hotline : (+65) 9088 9331

Past Projects 2013

Awarded by Poh Cheong for total 10 units of Gantry and Overhead cranes in Poh Cheong Malaysia Precast Yard
in Malaysia


Poh Cheong Precast and Contractor appointed Jenmon to deliver and install 6 units of Gantry cranes and 4 units of Overhead cranes with additional 2 cranes for the construction and operation of their first overseas manufacturing facility in Iskandar Malaysia. This gigantic plant is sited on a 15.5-acre freehold industrial land and It has a daily capacity of producing more than 300 cubic meters of precast concrete.

Despite the market being dominated by local crane players, Jenmon was chosen by Poh Cheong on the basis of mutual trust and the order was a break through for Jenmon to venture into the Malaysia market.

Jenmon operated the fabrication in full force in our Johor plant, thereby Jenmon saved much time for delivering both Gantry and Overhead cranes to Poh Cheong precast yard.

Awarded by Hyflux Singapore for Gas Turbine Power Plant for
23 units of Manual Chain Blocks and 5 units of Underslung cranes at Tuas Plant


Hyflux Singapore is a specialist in water treatment and a leading global desalination plant provider. Additionally, they go beyond energy generation to the waste to energy plants by focusing on the environmental friendliness.

Hyflux had made a contract with Jenmon to supply total 23 units of Manual Chain Blocks and 5 units of Underslung cranes for their operation of a 411 MW on-site combined cycle gas turbine power plant with the desalination plant, which will supply an electricity to the desalination plant in Singapore. This landmark desalination project is sited 250m away from SingSpring Desalination Plant, which is also built by Hyflux that these two desalination plants are expected to fulfil the nation's water needs up to 25% contributing to the diversification and sustainability of Singapore's water supply.

From installation to commissioning, Jenmon inspected and checked the entire chain blocks and underslung cranes carefully for the purpose of carrying out work safety and ensuring of the reliable quality. Besides, Jenmon satisfied the customer's specific requirement for underslung crane by reducing the need of vertical columns which will played a key role to block the obstructions for end user production floor.

Awarded by BAM International for 2 units of 70 ton Gantry cranes for bridge project


One of Europe's largest contracting companies having extensive international experience. Their cantilever bridge was undergoing modification in Batam, Indonesia, in preparation for the largest oil and gas project in Darwin, Australia' Northern Territory. Part of the innovation included gantry cranes, capable of transporting large concrete beams across the self-propelled CLB.

Jenmon was proud to be appointed for supplying two units of 70 tons Double Girder Gantry Cranes. The whole projects comprises of crane design in Australia Standards, fabrication control, arrangement of shipment, pre-assembly, testing and commissioning at Batam yard. It also included calibration at Darwin for final commissioning.

Most of the operations will be carried out away from the convenience of Singapore home ground. Necessary considerations and preparations were required to ensure smooth operations at the Batam yard.

Click here to find out more

Awarded by China Railway 11 Bureau Group Corporation for 1 unit of 60 ton Double Girder Gantry cranes in Tuas


Along the numerous cranes in Tuas, Jenmon secured a contract from China Railway 11 Bureau Corporation to deliver, install, and commission for 2 unit of Gantry crane and for the assembly 2 units of China – made gantry cranes in their precast yard for their LTA Tuas Extension project.

Jenmon's crane design specification is based on the FEM/DIN standards and Singapore SS497, unlike the China Made design local standards, their imported cranes in Singapore were, therefore, non-compliance.

With our assistance , Jenmon managed to review and amend with site worked correction to ensure their cranes were operational. With the contractual agreement, Jenmon periodically conducted maintenance services on the China - made gantry cranes and on our newly installed Jenmon cranes to enhance the safety and productivity of cranes.

Our Jenmon cranes were completed with many safety features , remote controls, and anti – collision sensors which ensured the more smooth and efficient operation of the cranes

Awarded by McConnell Dowell for 2 units of 25 ton Gantry cranes and 1 unit of 1.5 ton Overhead crane for Land Transport Authority (LTA) station - C916


As one of the main subsidiaries of McConnell Dowell, McConnell Dowell South East Asia Pte Ltd has been built a variety of quality assets and facilities for clients and communities. They are expertise in building, civil, electrical, fabrication, marine, mechanical, pipelines, rail, tunnel and underground construction around the world.

Among the numerous LTA projects, DTL2 C916 Beauty World Station and Tunnel project were awarded to McConnell Dowell, which has been operating for over 40 continuous years supporting the development of modern Singapore . With McConnell's venture to their first MRT project, it opened and cemented a stronger foot hole in the industry.

For this project, Jenmon was contracted by McConnell to supply and install total 2 units of Gantry cranes and 1 unit of Overhead crane for this project.

With a good track record and excellent customer service relationship, these are traits of Jenmon business continuing to pursue which helps both parties to come into common goals. Though the gantries were standard, the reliability from start of sales to completion and daily operation of the cranes showed that Jenmon understanding and product quality exceed expectation. Another strong value of Jenmon that is to provide Spirit of Excellent in our every tasks or job.

Our aim is to ensure an operative crane on site at all times.

"Jenmon is made up of veterans with years of experience in the lifting industry. We are constantly updated with the latest market products, solutions and technologies, enabling us to provide solutions to suit all varieties of industrial lifting and handling systems. From the very first contact to maintenance, our team has the complete range of services tailored for you. "

Terms of use|Disclaimer|Limitation of Liability
Copyright © Jenmon 2017. All Rights Reserved

Send in your enquiry
Our consultant will provide you with the perfect lifting solutions